Marine Wraps in Deerfield Beach, FL
A wrap is the fastest way to transform a boat without touching the gelcoat.
Marine Wraps in Deerfield Beach, FL
A wrap is the fastest way to transform a boat without touching the gelcoat. We design and install custom boat wraps, hull graphics, name lettering and decals in marine-grade cast vinyl that stands up to UV, salt and spray, from a full color-change hull to a clean name and registration package. At our Deerfield Beach shop we print, laminate and install with the surfaces and curves of a boat in mind, so the vinyl lays down tight and lasts.
Ramsey has run vinyl and wrap work for 20-plus years across cars, trucks and boats, and marine is the toughest test for any film. We use cast vinyl with UV-stable inks and marine lamination, prep every surface properly, and wrap compound curves so edges stay down in the sun and salt. Every install is done to his standard and backed by our one-year workmanship guarantee.
- Marine-grade cast vinyl with UV-stable inks and lamination
- Custom design and proofing before we print
- Full or partial hull wraps and color changes
- Boat name, hailing port and registration number lettering
Why South Florida Boaters Choose Boat Wraps
Repainting a hull is expensive and permanent, which is why boat wraps have taken over down here. A wrap lets you completely change the color and add custom graphics for a fraction of a paint job, and it protects the gelcoat underneath from the sun instead of grinding it away. In South Florida that protection matters, because relentless UV chalks and fades gelcoat fast, and a quality wrap with UV-stable inks and marine lamination holds its color far longer than a cheap film would. Boaters use wraps to freshen a tired hull, run a custom look at the sandbar off Deerfield and Pompano, add a boat name and registration numbers, or brand a charter or center-console for business. Because it is vinyl, it can also come off down the road without damaging the hull, so you are not locked into one look forever. Sharp graphics, sun protection and reversibility are why wraps beat paint for a lot of boats across Broward and Palm Beach.
Our Marine Wraps Process
- 1
Consult & Design
We talk look and goals, then design your color, graphics, name and registration layout.
- 2
Proof & Print
We proof the artwork, then print on marine-grade cast vinyl with UV-stable inks and laminate.
- 3
Prep & Clean
Every surface is cleaned and prepped so the vinyl bonds and the edges stay down.
- 4
Install & Seal
We wrap the hull and curves, trim clean, and seal edges to hold up in sun and salt.
Included With Your Marine Wraps
- Marine-grade cast vinyl with UV-stable inks and lamination
- Custom design and proofing before we print
- Full or partial hull wraps and color changes
- Boat name, hailing port and registration number lettering
- Edge sealing and finishing for salt and spray
- One-year workmanship guarantee plus material warranties
Your Boat Wrap & Decal Options
We do everything from a simple name package to a full custom hull wrap, all in marine-grade vinyl.
- Full Hull Wrap — Complete color change and graphics that transform the boat and protect the gelcoat.
- Partial Wrap & Accents — Hull side graphics, accent stripes and color blocking without wrapping the whole hull.
- Name & Registration — Boat name, hailing port and Florida registration numbers in clean, durable lettering.
- Custom Graphics & Fish Art — Printed gamefish, camo, patterns and logos for a one-of-a-kind look.
- Charter & Business Branding — Logos, contact info and branding for charter boats and commercial rigs.
The Tint Station Difference
The difference between a wrap that lasts and one that peels in a season is all in the vinyl and the prep. We use cast vinyl, not cheaper calendared film, because cast conforms to the compound curves of a hull and stays dimensionally stable in the heat, and we laminate with UV-stable material so the color holds against Florida sun. Surface prep is non-negotiable on a boat: wax, salt residue and oxidation all fight adhesion, so we clean and prep every panel before the film touches it, then seal the edges that take the most abuse from spray. A wrap also protects the gelcoat it covers, keeping UV off the original finish, and it comes off cleanly later without the damage a bad paint job leaves behind. If the hull needs help first, we can handle fiberglass and gelcoat repair before wrapping, and pair the new look with marine lighting to finish the build.
Explore More Tint Station Services
Frequently Asked Questions
How long does a boat wrap last in Florida?
Is a wrap cheaper than painting my boat?
Will a wrap damage my gelcoat?
Can you just do my boat name and registration numbers?
Can you print custom graphics like fish or camo?
Should I repair gelcoat damage before wrapping?
Can a wrap be removed later?
Where do you install boat wraps?
Ready for Marine Wraps?
Talk to Ramsey and the Tint Station team about your project — free, no pressure.